|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FSA2156 -- Low-Voltage SPST 0.4 Analog Switch August 2007 FSA2156 -- Low-Voltage SPST 0.4 Analog Switch Features Maximum 0.7 On Resistance (RON) for +2.7V Supply 0.25 Maximum RON Flatness for +2.7V Supply Space-Saving MicroPakTM and SC70 Packaging Broad VCC Operating Range: 1.65 to 4.3V Fast Turn-on and Turn-off Times Over-Voltage Tolerant TTL-Compatible Control Input Suitable for 2 UL USB2.0 Applications (200mA) Low ICCT Current Over Expanded Control Input Range Description The FSA2156 is a high-performance Single-Pole Single-Throw (SPST) analog switch that features ultra low RON of 0.4 (typ.) at 2.7V VCC. The FSA2156 operates over the wide VCC range of 1.65V to 4.3V and is fabricated with sub-micron CMOS technology to achieve fast switching speeds. The select input is TTLlevel compatible. FSA2156 features very low quiescent current even when the control voltage is lower than the VCC supply. This feature facilitates longer battery life in mobile handset applications and allows for the direct interface with baseband-processor, general-purpose I/Os. Ordering Information Part Number FSA2156P6 FSA2156P6X FSA2156L6X Top Mark Pb-Free 2156 2156 FY Package Description 6-lead SC70, EIAJ SC88, 1.25mm Wide 6-lead SC70, EIAJ SC88, 1.25mm Wide 6-lead MicroPakTM, 1.0mm Wide Packing Method 250 Units on Tape and Reel 3000 Units on Tape and Reel 5000 Units on Tape and Reel Pb-free package per JEDEC J-STD-020B. Analog Symbol A1 6 VCC VCC 1 6 A GND 2 5 NC NC 2 5 B B3 4 Sel Sel 3 4 GND Figure 1. SC70 Pin Assignments (Top View) Figure 2. MicroPakTM Pin Assignments (Top View) Truth Table Control Input (S) L (LOW Logic Level) H (HIGH Logic Level) Pin Descriptions Function Name A, B Sel Function Switch I/O Data Ports Control Input Switch Open (OFF) Switch Closed (ON) (c) 2006 Fairchild Semiconductor Corporation FSA2156 Rev. 1.0.3 www.fairchildsemi.com FSA2156 -- Low-Voltage SPST 0.4 Analog Switch Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VSW VCNTRL IIK ISW ISWPEAK PD TSTG TJ TL ESD Note: 1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed. Supply Voltage Switch I/O Voltage (1) (1) Parameter Min. -0.5 -0.5 -0.5 50 Max. 4.6 VCC + 0.3 4.6 50 500 500 180 180 Unit V V V mA mA mA mW mW C C C kV kV kV Control Input Voltage Input Clamp Diode Current Switch I/O Current (Continuous) Pulsed at 1ms Duration, <10% Duty Cycle Power Dissipation at 85C Storage Temperature Range Maximum Junction Temperature Lead Temperature (Soldering, 10 seconds) All Pins Human Body Model I/O to GND Charge Discharge Model SC70 Package MicroPakTM Package -65 +150 +150 +260 2 8 2 Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC VCNTRL VSW ISW TA JA Note: 2. Control input must be held HIGH or LOW; it must not float. Supply Voltage Control Input Voltage Switch I/O Voltage Switch I/O Load Current Operating Temperature Thermal Resistance (free air) SC70 6L package MicroPakTM 6L package -40 (2) Parameter Min. 1.65 0 0 Max. 4.3 VCC VCC 350 85 350 310 Unit V V V mA C C/W C/W (c) 2006 Fairchild Semiconductor Corporation FSA2156 Rev. 1.0.3 www.fairchildsemi.com 2 FSA2156 -- Low-Voltage SPST 0.4 Analog Switch DC Electrical Characteristics All typical values are at 25C unless otherwise specified. Symbol Parameter Conditions VCC (V) Min. 3.6 - 4.3 VIH Input Voltage High 2.7 - 3.6 2.3 - 2.7 1.65 - 1.95 3.6 - 4.3 VIL Input Voltage Low 2.7 - 3.6 2.3 - 2.7 1.65 - 1.95 IIN INO(0FF) Control Input Leakage Off Leakage Current of Port B On Leakage Current of Port A Power Off Leakage Current Power Off Leakage Current(3) VCNTRL = 0 to VCC VA = 0.3V, VCC - 0.3V, VB = 0.3V, VCC - 0.3V or Floating Figure 4 VA = 0.3V, VCC - 0.3V, VB = Floating Figure 5 Port A VA = 0.3V, 4.3V, VCC = 0V, VB = 0V Port A VA = 0.3V, 4.3V, VCC = 0V, VB = Floating ION = 100mA, VB = 0V, 0.7V, 3.6V and 4.3V RON Switch On Resistance(4) Figure 3 ION = 100mA, VB = 0V, 0.7V, 2.0V and 2.7V ION = 100mA, VB = 0V, 0.7V, 1.6V and 2.3V ION = 100mA, VB = 0.7V ION = 100mA, VB = 0V, 0.7V, 3.6V and 4.3V On Resistance Flatness(5) Figure 3 ION = 100mA, VB = 0V, 0.7V, 2.0V and 2.7V ION = 100mA, B = 0V, 0.7V, 1.6V and 2.3V ION = 100mA, VB = 0V, 0.7V, 0.9V and 1.65V ICC ICCT Quiescent Supply Current Increase in Icc per Input VSW = 0 or VCC, IOUT = 0 VCNTRL = 2.6V VCNTRL = 1.8V 1.65 - 4.3 1.95 - 4.3 -10 10 -0.5 -50 TA = +25C Typ. Max. TA = -40 to +85C Min. 1.4 1.3 1.1 0.9 0.7 0.5 0.4 0.4 0.5 50 Units Max. V V V A nA IA(ON) 1.95 - 4.3 0V 0V 4.3 2.7 2.3 1.65 4.3 2.7 2.3 1.65 4.3 4.3 -20 20 -100 100 25 nA A nA I0FF -4 0.36 0.4 0.55 1.5 +4 -35 35 0.60 0.7 0.80 0.25 0.25 0.3 0.9 -100 30 3 7 12 100 -500 500 6.0 15.0 nA A RFLAT(ON) Notes: 3. Guaranteed by characterization; not production tested. 4. On resistance is determined by the voltage drop between A and B pins at the indicated current through the switch. 5. Flatness is defined as the difference between the maximum and minimum value of on resistance over the specified range of conditions. (c) 2006 Fairchild Semiconductor Corporation FSA2156 Rev. 1.0.3 www.fairchildsemi.com 3 FSA2156 -- Low-Voltage SPST 0.4 Analog Switch AC Electrical Characteristics All typical values are at 25C unless otherwise specified. Symbol Parameter Conditions VCC (V) 3.6 - 4.3 tON VB = 1.5V, Turn-On Time RL = 50, CL = 35pF 2.7 - 3.6 2.3 - 2.7 1.65 - 1.95 3.6 - 4.3 tOFF VB = 1.5V, Turn-Off Time RL = 50, CL = 35pF Charge Injection Off Isolation -3db Bandwidth Total Harmonic Distortion CL = 1.0nF, VS = 0V , RS = 0 f = 100kHz RT = 50 RT = 50 CL = 0pF RT = 600, VSW = 0.5VPP, f = 20Hz to 20kHz 2.7 - 3.6 2.3 - 2.7 1.65 - 1.95 Q OIRR BW THD 2.3 - 4.3 1.65 - 1.95 1.65 - 4.3 1.65 - 4.3 1.65 - 4.3 90 6 1.3 -65 80 .02 pC dB MHz % Figure 10 Figure 9 Figure 8 40 65 70 75 70 75 80 ns Figure 6 Figure 7 TA = +25C Min. Typ. Max. 55 60 65 TA = -40C to +85C Min. Max. 60 65 70 ns Figure 6 Figure 7 Units Figure Capacitance Symbol CIN COFF CON Parameter Control Pin Input Capacitance B-Port Off Capacitance A-Port On Capacitance Conditions f = 1MHz f = 1MHz f = 1MHz VCC (V) 0 4.3 4.3 TA = +25C Min. Typ. 1.5 38 115 Max. Units pF pF pF Figures Figure 11 Figure 11 Figure 12 (c) 2006 Fairchild Semiconductor Corporation FSA2156 Rev. 1.0.3 www.fairchildsemi.com 4 FSA2156 -- Low-Voltage SPST 0.4 Analog Switch Test Diagrams VON Floating, 0.3V or Vcc-0.3V A ION VCNTRL RON = VON / ION GND B FSA2156 A IA(OFF) A VSW VCNTRL GND B VSW GND FSA2156 Figure 3. On Resistance Figure 4. Off Leakage FSA2156 B Floating B FSA2156 A IA(ON) A VSW VCNTRL GND VSW GND RS A CL GND RL VOUT VCNTRL GND RL and CL are functions of the application environment (see AC/DC tables for values). CL includes test fixture and stray capacitance. Figure 5. On Leakage Figure 6. Test Circuit Load Figure 7. Turn-On / Turn-Off Waveforms (c) 2006 Fairchild Semiconductor Corporation FSA2156 Rev. 1.0.3 www.fairchildsemi.com 5 FSA2156 -- Low-Voltage SPST 0.4 Analog Switch Test Diagrams (Continued) Network Analyzer FSA2156 GND VCNTRL GND GND VIN RS VS GND V CNTRL GND GND V OUT GND R S and R T are fun ction s of the app lication en viron men t (see AC/DC tab les for value s). Off is olation = 20 Log (V OUT/V IN). RT GND RT GND V IN Network Ana lyzer FSA 215 6 RS VS GND RT GND CL VOUT RT and CL are functions of the application environment (see AC/DC tables for values). CL includes test fixtures and stray capacitance. Figure 8. Bandwidth Figure 9. Channel Off Isolation Generator B VS RS GND nSn VCNTRL GND VSW FSA2156 A CL GND VOUT VCC Input - VCNTRL Off 0V DVOUT VOUT On Off CL includes test fixture and stray capacitance Q = DVOUT / CL Figure 10. Charge Injection Test B Capacitance Meter F=1MHz FSA2156 Capacitance Meter VCNTRL F=1MHz B FSA2156 VCNTRL A A Figure 11. Channel Off Capacitance Figure 12. Channel On Capacitance (c) 2006 Fairchild Semiconductor Corporation FSA2156 Rev. 1.0.3 www.fairchildsemi.com 6 FSA2156 -- Low-Voltage SPST 0.4 Analog Switch Physical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 13. (c) 2006 Fairchild Semiconductor Corporation FSA2156 Rev. 1.0.3 6-Lead, SC70 Package www.fairchildsemi.com 7 FSA2156 -- Low-Voltage SPST 0.4 Analog Switch Physical Dimensions (Continued) Dimensions are in inches (millimeters) unless otherwise noted. Figure 14. 6-Lead, MicroPakTM Package (c) 2006 Fairchild Semiconductor Corporation FSA2156 Rev. 1.0.3 www.fairchildsemi.com 8 FSA2156 -- Low-Voltage SPST 0.4 Analog Switch Tape and Reel Specification Tape Format for SC70 Package Designator P6X Tape Section Leader (Start End) Carrier Trailer (Hub End) Number Cavities 125 (typical) 3000 75 (typical) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Tape Dimensions Dimensions are in inches (millimeters). Tape Size (8mm) DIM A 0.093 (2.35) DIM B 0.096 (2.45) DIM F 0.138 0.004 (3.50 0.10) DIM Ko 0.053 0.004 (1.35 0.10) DIMP1 0.157 (4.00) DIM W 0.315 0.004 (8.00 0.1) (c) 2006 Fairchild Semiconductor Corporation FSA2156 Rev. 1.0.3 www.fairchildsemi.com 9 FSA2156 -- Low-Voltage SPST 0.4 Analog Switch Tape Format for MicroPakTM Package Designator Tape Section Leader (Start End) L6X Carrier Trailer (Hub End) Number Cavities 125 (typical) 5000 75 (typical) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Tape Dimensions Dimensions are in inches (millimeters). Reel Dimensions Dimensions are in inches (millimeters). Tape Size (8mm) A 7.000 (177.80) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 .0331 +0.059 / -0.000 (8.40 +1.50 / -0.00) W2 0.567 (14.40) W23 W1 +0.078 / -0.039 (W1 +2.00 / -1.00) (c) 2006 Fairchild Semiconductor Corporation FSA2156 Rev. 1.0.3 www.fairchildsemi.com 10 FSA2156 -- Low-Voltage SPST 0.4 Analog Switch (c) 2006 Fairchild Semiconductor Corporation FSA2156 Rev. 1.0.3 www.fairchildsemi.com 11 |
Price & Availability of FSA215607 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |